29 DIY Fleshlight ideas: How To Make a Pocket Pussy with step-by-step guides

Introducing the best DIY pocket pussy list – improved and created by Bedbible!

We took those tried-and-true DIY Fleshlight and pocket pussy projects and improved upon them.

Plus, we went into the Bedbible laboratory and came up with 5 NEW exclusive DIY pocket pussy and Fleshlights that you can make at home for just a few bucks!

Best yet, most of our homemade Fleshlights and pocket pussies are discreet and can be used over and over again!

So, let’s get started!

Supplies for Your DIY Fleshlight or Pocket Pussy

It’s easy to make a homemade pocket pussy or DIY Fleshlight with things you have around the house.

Use your imagination and get creative! I took a little trip to The Dollar Tree and found several things for just a buck which I used to build our DIY strokers!

So, take a look at the following list and see what you have lying around the house or garage.

The rest you can order online at your favorite retailer or take a trip to your local dollar shop.

• Potato chip cans (Lay’s Stax and Pringles)
• Flexible or plastic water bottles with lids (The Dollar Tree has some great ones!)
• Dish towels
• Socks
• Rubber bands or pony tail holders
• Mardi Gras type plastic beads
• Bubble wrap
• Duct tape
• Sponges
• Medical gloves that stretch (I got a 100-count box of latex gloves in XL for $9.99 on Amazon)
• Water and regular balloons
• Old pillows or stuffed animals
• Water-based lubricant

Now that I have shared some of the items, I have used to create these homemade pocket pussies, let’s jump right into all of the fun DIY projects!

Here is a list of the different DIY Fleshlight ideas:

Below is a video where I give a quick overview of what you need and what your new homemade fleshlight will look like:

1. Pringles Can Pocket Pussy, New and Improved!

The Pringles can DIY Fleshlight is quite the popular stroker project!

However, I’ve made a few improvements to make your homemade sex toy even better than the original.

For instance, I added a sponge to the top, which has a split in the center, that feels more like entering a nice, tight vagina instead of the aggravation of adding something around the rim of the can.

Here’s what you need to make your own Pringles can Fleshlight.

Supplies:

• Pringles potato crisps can
• 5 cellulose sponges (I got a 2 pack for $1 at The Dollar Tree)
• 2 rubber bands or duct tape
• 1 stretchy exam glove (so you can reuse your new DIY sex toy)

Step by step guide:

Step 1

Wipe out the chip can with a paper towel. Place 4 sponges on top of one another – end to end -, along the sides of the can.

Step 2

Take the 5^th sponge and carefully cut a slit in the center of it. Place it over the opening of the can and secure it with a rubber band or duct tape.

Step 3

Place an exam glove into the slit and push it half way into the can.

Step 4

Stretch the opening of the glove over the can and sponge then secure it with a rubber band.

Step 4

Lube up and enjoy yourself! After use, simply remove the glove and toss it in the trash. That way, you can use this DIY pocket pussy over and over again!

Tips

For one-time use, wet your sponges with warm water. Skip the exam glove, lube up and enjoy the warm, squishy wetness. When finished, simply toss the entire can in the trash. With the cost of chips and sponges, your disposable pocket pussy would cost around $3.50 USD

You can also use different sized sponges inside the can, for instance, large, car wash sponges. Or, double the number of small sponges to make your masturbator tighter.

The super deluxe crisp can: Before adding the top sponge, dangle a few sets of plastic beads into the can. Continue with the final step and you have a DIY pocket pussy with exciting texture!

2. New and Improved Party Balloon DIY Pocket Pussy

You’ve probably seen the party balloon DIY pocket pussy all over the internet. Personally, I have no idea how that could possibly feel good! And if one of those balloons pops, that might not feel pleasant on your erect penis.

So, I thought about it and came up with a new and improved party balloon homemade pocket pussy. The best part is, that if a balloon pops, it will feel like a squirting vagina instead of a painful snap!

Supplies:

• Plastic container (one with a lid is perfect)
• Party Balloons
• Stretchy medical glove

Steps

Fill the party balloons about 1/8-1/4 full using warm water. Place them into the plastic container, alternating side-to-side.

Push the fingers of the glove down, in between the balloons.

Carefully stretch the opening of the glove over the rim. This keeps the balloons from falling out as well as prevents you from having to rinse off the balloons after each use.

Squirt some of your favorite lube into the glove then slather it on yourself and have some fun. When finished, simply pull out the glove and toss it in the trash, Place the lid on the container and put it away for another day!

Tips:

Fill the balloons with vegetable oil instead of water. It takes a bit more finesse to do, but it will give you a completely different feel.

Dangle some cheap, plastic party beds among the balloons for some texture.

Before using your homemade pocket pussy again, soak the water-filled balloons in hot water for about 15 minutes so they are warm. Or, if you enjoy temperature play, put some of your balloons in warm water and some in the freezer!

3. The Dish Towel Pocket Pussy IMPROVED!

The dish towel pocket pussy is one of the quickest, easiest and most discreet homemade strokers around! I simply added my own creative twist to this DIY project so your new stroker has a variety of tightness.

Supplies:

• 1 dish towel or hand towel
• Stretchy exam glove
• Several rubber bands or pony tail holders

Steps

Fold the towel long ways and begin rolling it, keeping in mind the girth of your penis. 

If you need a bit of help, place a toothpaste tube inside the towel before rolling it.

Once your towel is completely rolled, add rubber bands or pony tail holders of different sizes and thicknesses, along the length of the towel.

Next, place a stretchy exam glove inside the towel, stretch the glove opening over the end of the towel and secure with another rubber band.

Apply lube inside the glove and to your penis and stroke till your dick’s content. When finished, remove the glove and toss it in the trash. Leave your soft pocket pussy as it is or disassemble it and no one will be the wiser!

Tips

Use a towel that is ribbed or textured for a more interesting feel.

Place a few plastic beaded necklaces, bungee cords or whatever you can find around the house on the towel before rolling it up to add more exciting texture.

4. The Toilet Paper Pocket Pussy

Put that pandemic hoard to good use by making a toilet paper pocket pussy! It’s extremely easy to make and you can still use the tissue afterward – that is, if you’re not too rough!

Supplies:

• 1 roll of toilet paper, preferably with a ribbed texture
• Rubber bands or pony tail holders
• Stretchy exam glove

Steps

Place your finger between the cardboard tube and the toilet paper. Go all the way around the tube until the toilet paper is no longer connected.

Slide out the carboard tube and toss it.

Take a couple of rubber bands or pony tail holders and stretch them around either end of the toilet paper.

Stuff a stretchy, exam glove into the center of the roll and fold the opening over one end.

Squirt your favorite lube into the glove and enjoy your quick and easy DIY pocket pussy! When finished, pull out the glove and toss it. Keep the toilet paper under the sink for the next time or use it for facial tissue; waste not, want not, especially in case toilet paper becomes scarce once again!

Tips

Instead of toilet paper, use a roll of generic paper towels. Not only will it accommodate a longer penis, paper towels are usually more textured.

Do not use this homemade pocket stroker without a glove! Otherwise the toilet tissue will come apart and stick all over you.

5. DIY Fleshlight Sport

The DIY Fleshlight sport is a super-cheap way to create a homemade Fleshlight for under $10. And, if you use condoms or stretchy, medical gloves, you can use this sex toy over and over again!

Supplies:

• Sports cup or bottle (that best fits your penis. I found one for $1 at The Dollar Tree)
• Several cellulose sponges
• 1 rubber band
• Stretchy exam glove

Steps

Remove the cap from your sports bottle or cup. Take the cellulose sponges and line the inside of the cup, overlapping the sponges to create texture and shape.

Take the top layer of sponges and fold them over the rim of the cup. Then, secure the sponges with a rubber band. You can also use duct tape, if you won’t be removing the sponges or using the cap for storage.

Stuff a stretchy, exam glove into the opening and fold it over the rim of the cup and the sponges.

Lube the glove and yourself up and enjoy your DIY Fleshlight Sport! Once you’ve pleasured yourself, simply pull out the glove and toss it in the trash.

Next, shove the sponges inside the cup downward, put the lid back on the cup and store it in a drawer, your closet or under the bed.

Tips

Cellulose sponges naturally feel damp. Therefore, pop your cup in the microwave for about 10 to 15 seconds to warm them up. Just be sure your cup is microwave safe.

For another warm and wet experience, put hot water in your cup before placing the glove inside. Pour out the excess water, stretch the glove over the opening and enjoy! Afterward, squeeze the water out of the sponges and allow them to dry before storing your DIY Fleshlight sport.

Don’t have medical gloves? No problem! Slip on a condom instead!

6. DIY Pocket Pussy; The Love Plushie

Sure, sticking your dick into a plush toy may seem a bit strange to some. However, this is an extremely discreet way to masturbate without anyone knowing you have a sex toy! Just make sure you choose a plush toy that you can sit on a shelf or in your closet that matches your style and personality.

Supplies:

• 1 stuffed toy
• Stretchy exam glove or condom

Steps

Find an area of the toy that’s on the underside and using scissors or a knife, poke a hole in the fabric.

Gently tear the fabric to create a hole to accommodate your penis size.

Put your fingers inside the toy and move the fiber fill around, making a canal for your penis.

Then, place a stretchy glove inside the hole.

Lube the inside of the glove and enjoy your homemade pocket pussy; aka, the love plushie. When you’re finished, just pull out the glove, toss it and put your plushie on a shelf or in the closet. You can also use your toy by simply wearing a condom.

Tips

Search for a plush toy that’s more masculine like a snake, dinosaur or even one of your state’s sports mascots; something that wouldn’t seem odd for you to own.

When using your homemade masturbator, keep your thumbs on the edges of the glove if your toy isn’t narrow enough to stretch the glove over.

Put your love plushie under a heating pad or blanket before use for a warm, soft solo session.

7. Drink Bottle DIY Masturbator

This DIY pocket pussy is extremely easy to make with things most everyone has around the house! Therefore, it may not cost you a penny to create.

Supplies:

• Your choice of plastic drink bottle (soda, water, tea)
• Bag of fiber fill or an old pillow or stuffed toy
• Sponge
• Duct tape
• Stretchy medical glove

Steps

Rinse your bottle and allow to dry so the stuffing doesn’t stick to the sides. Using a bread knife, cut the top off the bottle, making sure the opening is big enough for your erect penis.

Trim any excess plastic with scissors and smooth any edges with sand paper. However, that’s not required, since we are covering the entrance with a sponge.

Now, stuff the bottle fully with the fiber fill fluff or pillow filling; be sure you put in plenty so the sides of the bottle will still stimulate you without feeling hard.

Once filled, place your fingers in the center of the bottle and make a hole for your penis.

Next, take a sponge that covers the entire opening and cut a slit in the center.

Using strong duct tape, secure the edges of the sponge all the way around the bottle.

Next, push a stretchy medical glove through the slit and fold the opening over your sponge.

Before sliding in, be sure and lube up the inside of the glove and your penis! Once you’ve had a hot session with your new DIY pocket pussy, just pull out the glove and toss it. That way, you can use your stroker over and over again.

Tips

Instead of using a medical glove, you can always put on a condom.

Choose a bottle with ridges inside, as I did, for extra texture and stimulation. You can also use a more flexible bottle so you can squeeze as you stroke.

Get a warm and cozy solo session by wrapping your homemade pocket pussy in a hot water bottle or heating pad for about 30 minutes beforehand.

8. Candy Cup DIY Fleshlight; Improved!

This do-it-yourself pocket pussy is quite popular. As a matter of fact, this video is so hilarious, I can’t help but share it! Sure, you can follow those instructions if you choose. However, I have tweaked this design to give you crazy-good texture that you’ll feel a lot more than gummy candies!

Supplies:

• A tall, plastic drink cup (I found one at The Dollar Tree for $1)
• Hand towel or dish towel
• Stretchy medical glove
• Rubber bands
• Non-chocolate candy of your choice (I suggest Red Vines licorice for amazing texture; $1 at The Dollar Tree)

Steps

Fold your towel in half, long ways.

Lay the glove at the end of the towel with a few inches of the opening of the glove hanging over.

Next, take the candy of your choice and lay it next to the glove in a pattern or randomly.

Now, start rolling your towel carefully, making sure you leave enough room for your penis inside.

The towel should look like this when finished. If the glove isn’t sticking out enough, gently pull until a few inches are sticking out.

Place the rolled towel inside of your cup; the opening of the glove should now be sticking upward.

Fold the glove down, stretching it over the opening of the cup. Finally, secure the glove with a rubber band, if necessary.

Now, lube the inside of the glove up with a water-based lube and go to town on your sweet candy cup DIY masturbator! When you’re finished, pull out the glove and toss it in the trash. If you want to, disassemble your sex toy, eat the candy and take a nap.

Tips

Instead of using candy, get creative by using Mardi Gras beads, bungee cords, marbles or anything else you can scrounge up around the house to create texture.

Using a towel with ribbing or other textures will only add to the sensations of your homemade sex toy.

Experiment with different sized cups and towels with varying thickness.

9. DIY Pool Noodle Pocket Pussy: The New and Improved Canoodler!

This one-size-fits-all do-it-yourself pocket pussy is a bit more difficult to make. But if you stick with it, this homemade sex toy will be your absolute favorite! Plus, it costs far less than a store-bought Fleshlight. I improved on the same ole instructions to give you the wildest texture you’ve ever felt!

Supplies:

• Swimming pool noodle
• Plastic Mardi Gras or party beads
• Soft washcloth
• Hot glue gun
• Rubber bands
• Stretchy medical glove

Steps

Using a sharp knife, cut the pool noodle to the length you prefer.

Next, cut your pool noodle tube long ways.

Now, using a knife, remove some of the thickness from the middle of the pool noodle. The noodle will keep a slit and adjust to your girth, therefore, it’s not necessary to thin it too much. Also, don’t worry about it being smooth and perfect, the lumps, bumps and pockets will make for stimulating texture!

The next step is to cut one of your bead necklaces so it’s a single strand, rather than a loop. Apply hot glue to the inside of the pool noodle a little bit at a time, placing the beads in a random pattern.

Fortunately, the hot glue melts the material and allows the beads to settle into the divots. Use another strand of beads, if necessary. Allow everything to cool.

The next step is to place the wash cloth over the beads, tucking it into the tube so your penis will have plenty of room.

Tuck a stretchy medical glove into one end of the noodle, leaving a few inches hanging out.

Secure the wash cloth with 2 thick rubber bands on either end of the tube.

Now, stretch the glove over the end of the tube and the wash cloth. Secure the glove with another rubber band.

Tuck the other end of the cloth inside the tube, although, that’s not 100% necessary. It just makes it look neater. Squirt some lubricant inside the glove and apply lube to your penis too. Slide yourself in and enjoy the amazing textures!

Tips

Instead of beads, use what you have lying around the house and garage. For instance, bungee cords, plastic tubing, rubber gaskets or marbles will add interesting texture.

If you’re not the crafty type, you don’t have to add beads at all! Simply carve the inside of the pool noodle to create your texture. Plus, doing it this way eliminates the need for a wash cloth!

10. Nerf Football DIY Pocket Pussy

This particular DIY masturbator is a commonly shared idea. However, I shopped at The Dollar Tree and got this football for $1! Not only does it look cool, it was far cheaper than a name brand foam football.

Supplies:

• Foam (Nerf-type) football
• Stretchy medical glove

Steps

Using a sharp knife, cut one of the pointed tips off the football.

Using your fingers, stick them into the center of the foam, making a hole that will accommodate your erect penis. If necessary, stick a knife into the center of the foam and turn it in circles. Next, reach in and pull out any loose foam.

Now, place a stretchy, medical glove into the hole and fold the opening over the ball.

Lube up and have a ball; yes, pun intended. When finished, discard the glove and store the football on the flat end. It looks cool and no one will know you have a DIY sex toy!

Tips

If you don’t have any gloves around, use a plastic bag or large, freezer storage bag. Either of these will fold over the end of the football and stay in place nicely.

11. Bubble Wrap DIY Stroker

Put those packing materials to good use! Bubble wrap comes in all sizes and textures so, rather than throwing it out, use it to create a DIY pocket pussy! Not only will you save some serious cash, you’ll prevent another piece of trash from hitting the landfill.

Supplies:

• Sheet of bubble wrap
• Dish or hand towel
• Rubber bands
• Stretchy medical glove

Steps

Roll the bubble wrap with the bubbles facing inward.

Secure in the center with a rubber band or a small piece of duct tape.

Next, fold your hand towel in half, short ways. Wrap the towel around the bubble wrap – this will help you grip your bubble wrap pocket pussy. Secure with rubber bands at the top and bottom.

Next, push a stretchy, medical glove into one end, leaving a few inches out.

Fold the opening over the bubble wrap, tucking the towel under the glove.

Now you can lube yourself up, squirt some lube inside the glove and enjoy the pillowy, tight masturbator. Simply pull out the glove and toss it in the trash when you’re finished. Remove the towel and store the bubble wrap anywhere!

Don’t have any packaging? No problem! You can purchase rolls of bubble wrap anywhere that sells shipping and office supplies.

You can also repurpose a padded mailing envelope by cutting it open.

12. Easy DIY Sock Pocket Pussy

This classic homemade pocket pussy is super easy to make and perfect for those who aren’t crafty and don’t want to leave any evidence lying around. For this one, I have improved on how you fold the socks so they line up better! Here’s what you’ll need:

Supplies:

• 2 pair of crew socks
• Medical glove (Stretchy gloves are best.)
• Rubber bands or pony tail holders

Steps

Lay both pair of socks side-by-side. Fold the toe to meet the heel, upward, on one sock and backward on the other. Now, fold the sock openings the same way, one forward and one backward.

Next, take the medical glove and lay it on top one of the socks, leaving a couple of inches exposed above the sock to fold over.

The next step is to lay one pair of socks on top the other with the glove in between. Place a rubber band around the bottom of the socks, the next in the center and the last at the top.

Now, roll the opening of the glove down and tuck it under the top rubber band.

All that’s left to do now is lube up the glove and yourself and have a great time! When you’re finished, disassemble your DIY sex toy, toss the glove and no one will ever know!

Tips for Homemade Sock Pocket Pussies

Instead of stacking socks on top one another, why not place one sock inside the other?

Then, you simply roll the sock down on itself.

Next, push a glove inside the sock then secure with a rubber band.

You can make this DIY pocket pussy even thicker by putting more socks inside each other or using work socks, boot socks or hunting socks!

Another great tip is to use rubber bands or pony tail holders and scrunchies around various points of the sock tube to create tightness.

One more fun tip is to place flexible items in between the socks to create texture. Some examples of things you may have lying around would be bungee cords, licorice whips or thick shoe laces.

13. The Famous Fifi DIY Pocket Pussy

This homemade stroker was made famous in prisons when gents needed a warm and satisfying lay but had limited resources. And I have to give credit to the first dude who put this together as it’s one of the better do-it-yourself sex toys!

Supplies:

• 3 medical gloves
• Hand towel
• Rubber band

Steps

Lay your hand towel out flat. Next, fill each glove with warm water, leaving a couple inches at the top. Tie each glove closed like you would a balloon.

Lay the first glove, fingers upward, on the towel with the fingers just at the top edge.

Take your empty glove and lay it on top with the fingers pointing downward and a few inches of the glove opening above the towel.

Now, take the second, water-filled glove and place it on top both the full and empty glove.

Fold the bottom of the towel up over the gloves.

Carefully roll everything together, trying to keep the towel as tight as possible.

Secure the bottom of the roll with a rubber band.

Fold the empty glove over top of the towel. Secure with another rubber band.

Squirt some lube inside the empty glove and enjoy your DIY Fifi pocket pussy.

Tips

Use very warm water when filling the gloves. That way, by the time it’s all rolled together and ready to use, it will be the perfect temperature.

Want a wilder sensation? Fill one glove with hot water and the other with cold for incredible temperature play.

To reuse your Fifi, cover it with a heating pad or warming blanket before use.

14. Pop That Cherry DIY Fleshlight

Try the Bedbible original way to use bubble wrap by creating a DIY Fleshlight using a sports cup or bottle.

However, in order to give you more exciting stimulation, we are going to throw in some more squishy softness!

But the best part is that, done correctly, you will not only feel those bumpy bubbles, but some will gently pop around your erect penis.

Try the Bedbible original way to use bubble wrap by creating a DIY Fleshlight using a sports cup or bottle.

However, in order to give you more exciting stimulation, we are going to throw in some more squishy softness!

But the best part is that, done correctly, you will not only feel those bumpy bubbles, but some will gently pop around your erect penis.

Supplies:

• Soda, juice or water bottle (that fits your penis)
• 3 small sponges
• Small piece of bubble wrap
• 2 Rubber bands
• Stretch medical glove

Steps

Rinse out your chosen bottle – the idea here is to create a tight canal. Using a sharp, serrated knife, cut the top from the bottle.

Next, draw a circle of the bottom of the bottle onto a sponge; cut out the circle and place it in the bottom of the bottle.

Now, take the 2 sponges and slightly fold them in half together – this will help get those sponges in evenly. Once the sponges are inside and pushed down as far as they can go, place your fingers inside and separate the sponges so they curve around the sides of the bottle.

Now, roll your bubble wrap, inside out, making a tube. Small bubble, bubble wrap works best for this homemade pocket pussy. Push the bubble wrap in gently, using your fingers or something narrow and rounded as not to pop any bubbles – that’s your penis’s job!

Fold the excess bubble wrap over the top of the bottle and secure using a rubber band.

Next, push a stretchy, medical glove inside the bottle, fold it over and secure with the second rubber band.

Finally, pour some lube into the glove and slather it on your penis and gently slide into your new, homemade pocket pussy. When finished, toss the glove! If necessary, change out the bubble wrap and store until the next time you want to feel that pop!

Tips

Use bubble wrap of various sizes, for a different feel.

Instead of using a glove, this do-it-yourself pocket pussy is perfect to use with condoms!

15. DIY Fleshlight Chip Can; The Lay Me

After I was tasked with doing Bedbible’s version of the DIY Fleshlight and pocket pussy blog, I really started thinking about what I’d like to stick my penis in, if I had one.

That helped me improve the old homemade pocket pussies and come up with a few new ideas of my own!

One night, while eating a can of Lay’s Stax chips, I realized the container was far superior to the Pringles can in that it was plastic and flexible with ridges inside.

Then I had a great idea for my original DIY Fleshlight called the Lay Me.

Supplies You Need:

• Empty Lay’s Stax can
• 1-2 sets of gel insoles (depending on size, available at The Dollar Tree for $1 a set)
• 4 small sponges
• Duct tape
• Stretchy medical glove

Steps

Stack 2 sponges (standing end-on-end) on one side of the chip can.

Slide the gel insole inside, on top of the sponges, with the heel area pointing upward.

Place the additional 2 sponges on the other side of the chip can.

Carefully put the second insole inside. You may need to use a wooden spoon, the end of a tool or something long to push the insole down.

Fold the excess insole over the rim of the chip can and secure with strong, duct tape. Do the same with the second insole, securing it with duct tape as well.

This gives you nice, puffy, textured lips.

Now place a stretchy medical glove between the insoles and fold it over the top.

Lube up the glove and enjoy the insanely unique feel of your DIY Fleshlight! Just toss the glove when you’re finished and you can use this homemade Fleshlight over and over again!

Tips

The best thing about the Lay’s Stax cans is that you can squeeze the top and bottom for a super tight fit or, squeeze the sides to create a completely different feel.

Try turning your new toy in a circular motion as you thrust.

Stick your Lay Me in between two pillows for a hands-free solo session.

16. The Squirter DIY Fleshlight

Using this little DIY pocket pussy will have you curling your toes with anticipation.

Will she squirt this time?

Enjoy a gentle burst of wetness when you finally make her squirt.

Plus, you can use this homemade pocket pussy over and over again!

Here’s what you need to create the Bedbible original squirting DIY Fleshlight.

Supplies:

• Lay’s Stax potato chip can (important as it is waterproof)
• Plastic grocery bag
• Water balloon kit ($1 at The Dollar Tree)
• 1 Small kitchen sponge
• Rubber band

Steps

Rinse and dry the chip can – you don’t want crumbs getting all over your balloons and penis!

Fill several water balloons with hot water – that way they will still be warm when it’s time to use your new toy.

Be sure you alternate sizes and only fill them about half way or small enough to fit in the can side-by-side.

Take your plastic grocery bag and lay it flat.

Cut the handles off so you have a straight opening.

Now, push the bag down into the can. It helps to use the end of a hairbrush or screwdriver so you get the bag all the way into the can.

Fold the bag over the opening of the can and temporarily secure with a rubber band.

Fill your can with the water balloons making sure they can fit next to one another. Shaking the can a bit helps them fall into the bottom.

Next, lay your sponge over the top of the chip can so you can see where the center is. Then, using scissors, carefully cut an X in the center of the sponge.

Center the sponge on top of the can and pull the plastic bag through the hole.

Now, pull the bag down over the sponge and secure it with the rubber band you used earlier. Lube up and have a fantastic time!

Now, you can make her squirt and feel her gush around you! When finished, pull out the bag and throw away. Or, make a small hole in the bottom, rinse well with warm water and soap and add more balloons, as needed, the next time you want to play.

Tips:

Warm your water balloons up next time by floating them in a sink of hot water for about 15 minutes.

Want to experiment with temperature play? Put some of your water balloons in the fridge and some in a sink of warm water.

You can also use a medical glove, pulled through the sponge and folded over, to catch your jizz. Simply pull it out and throw it away – no clean-up necessary. Wearing a condom works too!

17. DIY Fleshlight Masturbator; The Wet and Wild Stroker

This incredible DIY Fleshlight is a Bedbible original creation. Sure, other do-it-yourself strokers use gel beads. However, our Wet and Wild Stroker is a self-contained sex toy that will keep your beads wet and your penis happy time and time again!

Supplies:

• Water bottle with lid that fits your girth (I found a fantastic one at The Dollar Tree for $1)
• Floral beads (gel beads)
• Large bowl or container, teaspoon measuring spoon, measuring cup
• Sponge
• Rubber band or pony tail holder
• Stretchy examination glove

Steps

Measure out 1 teaspoon of floral gel beads and place them in the bowl or container.

Add 3 cups of water. Let sit for 4-8 hours so the beads are at full size. I let mine sit overnight.

While your beads are hydrating, take a small, cellulose sponge and lay it on the opening of your cup in order to find the center.

Using scissors or a knife, cut a slit or poke a hole in the center. The smaller you make it, the tighter the opening will be.

Once the gel beads have expanded, drain any excess water from them using a colander, making sure your sink drain is closed or stopped.

Next, using your hands or measuring cup, start pouring the gel beads into your sports cup. Fill until there is about 2-3 inches of space left at the top. Keep in mind, the number of beads will determine how tight and unique it feels when penetrated.

Next, take your sponge, place it on top of the cup, pulling the sides and ends down. Secure the sponge with a thick rubber band or pony tail holder. This will give you a soft opening while keeping the beads in place.

Now, push a stretchy, exam glove into the slit of the sponge and stretch it over the top of the plastic container… you can secure with another rubber band, if you choose.

Squirt some water-based lube into the glove and onto your penis and plunge into the your wet and wild stroker.

After using the masturbator, simply throw away the glove then remove the sponge. Place the lid on your sports cup to keep the gel beads from drying out and use the rubber band to secure the sponge to the cup for storage. The beads will stay at full size for multiple uses. Plus, you can place the beads on a towel and dry them out and reuse over and over again.

Want to use your wet and wild homemade Fleshlight bare back? Eliminate the glove and add a bit of warm water to the sponge. Lube yourself up well and take the plunge from warm and tight to cool and wet! Afterward, pour your beads into the colander. Add a small amount of dish or hand soap and warm water. Swish around with your hand and rinse well. Then, place your beads back into the bottle and follow the instructions above for storage.

Tips

Soak your bottle in a sink full of warm water for several minutes to an hour before use to warm your gel beads. Or you can pour them into a strainer and run warm water over them.

Experiment with different amounts of beads in your bottle. Or try different shapes and sizes of gel beads!

Find a sports bottle that is squeezable for even more tightness and incredible sensations.

18. Real Feel Homemade Fleshlight

I have seen the cornstarch pocket pussy DIY everywhere yet there are no photos of the finished product. Why is that? Because it doesn’t work! So, I got my brain fired up and figured out how to make a realistic feeling Fleshlight using a recipe that’s commonly used for kids; slime! However, we are going to tweak it a bit to give it a more flesh-like feel and the consistency of putty.

Supplies:

• Sport or shaker bottle with lid
• Car wash size sponge (large enough to cover bottle opening)
• 16 oz. white school glue
• 4 Tablespoons multi-purpose contact lens solution
• 2 teaspoons baking soda
• Plastic beads
• Rubber band

Steps

Measure and cut your sponge to fit the top of the bottle, with enough extra to pull down and secure with a rubber band.

Carefully, poke a hole in the center of the sponge. Then, snip an X in the center, creating enough room for your erect penis. Sit the bottle and sponge aside.

In a medium size bowl, pour 16 oz. of white school glue (about 4 bottles).

In a small cup, measure 2 teaspoons of baking soda.

Add 4 tablespoons of contact lens solution.

Stir until the baking soda is dissolved.

Next, pour the liquid solution into the bowl of glue.

Stir well or knead using your hands. I found it easier to mix it with my hands but didn’t photograph that portion as the contact solution gets your hands really wet.

Once the putty is firm yet still stretchy, add your beads, folding the mixture over and kneading it until they are mixed in. The beads are to add texture, but, you can omit this step if you’d prefer a smoother texture inside your DIY Fleshlight.

Divide the mixture into two even pieces and roll until they are the length of your sports bottle.

Place both pieces inside the bottle and mold them to the sides.

Place the sponge over top of the bottle and secure with a thick, rubber band.

Moisten the sponge with warm water. Next lube yourself up and enjoy! Afterward, rinse the putty with warm water along with your cup.

Place the slime back in the container and place the cap on tightly. This should keep your slime pliable and soft for up to a week, maybe longer. Next time you want to use it, just knead it to warm it up and place it back in the bottle.

Tips

Add a little food coloring to the liquid mixture before adding to the glue to create any color you like.

You can use this flesh-like, DIY Fleshlight without the container. Just mold it into any shape you like, place it in various bottles or containers. Be sure and put it in an air-tight container when you’re finished.

If the mixture is too thick, just add a little warm water. Too slimy? Add a pinch or two of baking soda.

With this mixture, you can use baby oil as lube! It will mix well with the slime, giving it a shiny appearance.

Try letting the slime settle to the bottom of the container and press your penis into it for an extremely tight feel.

19-23. Fun with Food

An easy, cheap and unusual way to create a homemade pocket pussy is to head to your local grocery store!

The isles are filled with incredible things you can stick your penis in; either bare back or using a condom or exam glove.

Here are some ideas for masturbation fun with food that gives a whole new meaning to “foodie”.

Produce Pocket Pussies

Head to the produce department for some unique feeling homemade strokers! Some, you’ll need to hollow out and others, you just plunge your penis into!

• Bananas: Use the skins for super-slippery fun.
• Squash: Comes in all shapes and sizes. Cut a hole in it and go to town!
• Cucumber: Cut one end off, cut long ways and hollow out. They’re super wet so no lube needed!
• Melons: Melons comes in all textures and sizes. Just create a hole and take the plunge.
• Grapes: Fill a sports bottle or cup with grapes, cover the top with a medical glove and enjoy!

When you finish whacking off with any produce item, be sure and wash off! The natural sugars and acids in fruits and vegetables can cause stickiness, itchiness, yeast infections and allergic reactions.

24-29. Other Foods for Do-It-Yourself Pocket Pussies

Stroll the grocery isles and you’ll find even more interesting items you can use for masturbation! Some of them will need an exam glove or a plastic bag, slipped inside, so you are able to lube it up properly. Here are some more ideas for food pocket pussies.

• Bakery loaves of bread: Cut off the end, clear a canal and use a glove or plastic bag to line it.
• Pies: Sure, it’s a bit messy, but you can warm them up a little before diving in.
• Jars of fruit: Drain the liquid, slip a glove over the plastic jar’s rim and enjoy!
• Tubes of beef: A bit expensive, nowadays, but still cheaper than a Fleshlight!
• Cubes of tofu: For the vegans reading this, cube some tofu, place in a sports bottle and enjoy.
• Jello cups: Empty them from their packages, whole, and place them in a sports bottle for jiggly fun.

Arts, Crafts and Household DIY Pocket Pussy Supplies

If you use your imagination, you can come up with countless ways to build your own DIY pocket pussy or Fleshlight! Use what you have at home or visit your local craft, toy or hardware store for supplies. So, in addition to the ideas above, here are some more exciting ways to build a homemade stroker with some interesting materials and a chip can or sports bottle.

• Non toxic silicone sealant: Build a DIY Fleshlight by lining a chip can or sports bottle.
• Play-Doh or modeling clay: Add to the interior sides of a chip can or sports bottle and create your own textures! Bonus if you use the lid or cap to keep the dough soft for multiple uses.
• Silicone oven mitts: These heat resistant mitts are food-grade, non-toxic and great to wrap around your penis.
• PVC pipe: Another great DIY pocket pussy exterior!
• Flex Seal: Use this liquid rubber to build the interior of your Fleshlight then use a glove or condom when you have your solo sessions.

Keep in mind, though, that some things can be toxic. But the positive part is that there are more and more non-toxic versions of old-school stuff out there!

Why Make one?

Some of you may be asking why someone would want to make a DIY Fleshlight or pocket pussy. Well, that’s a great question – to which there are several unique answers. First, Fleshlights can be expensive. Therefore, building your own, with things you have around the house, is free. Second, some penis owners prefer not to have sex toys lying around the house.

So, making a homemade pocket pussy out of socks or hand towels allows for solo fun and zero evidence. Third, some penis owners aren’t able to purchase sex toys; either because of their age, local laws and ordinances, religious ramifications, financial constraints or having a mate that doesn’t approve of adult toys. Homemade strokers allow for all of those things while only costing a few bucks or completely free.

Finally, some guys may find it fun to create DIY Fleshlights and pocket pussies so they have dozens of varieties, textures and stimulation to play with.

DIY Fleshlight VS Buying a Fleshlight

If you’re on the fence and wondering if it’s better to create a DIY Fleshlight or just buy one, here are some things to think about and compare.

Should You Make a Fleshlight?

A DIY Fleshlight or homemade pocket pussy has its pros and cons. Therefore, if you are weighing your options of whether to make one vs buying one, here are the good and bad aspects, laid out for you.

Pros of a DIY Fleshlight or Pocket Pussy

• Extremely cheap, if not free, to create
• You can make your own textures and stimulation level.
• The Squirting DIY Fleshlight above!
• More discreet than sex toys
• Some disassemble and leave no evidence.

Cons of Making a DIY Pocket Pussy or Fleshlight

• Takes time to create
• With some, you have to be crafty.
• If you don’t have some of the things above, you’ll have to shop for them.
• Some require examination gloves or condoms.

Should You Buy a Fleshlight or Pocket Pussy?

If you don’t have a lot of spare time on your hands, why not just buy a Fleshlight or pocket pussy? Well, there are pros and cons to making that purchase. So here are the reasons you should or shouldn’t spend your hard-earned cash on a Fleshlight.

Pros of Buying a Fleshlight or Pocket Pussy

• Ready to use
• Last much longer than a do-it-yourself sex toy
• Some come with a warranty.
• No need to use an exam glove or condom.
• All are washable.
• Some pocket pussies are relatively inexpensive.
• Some are automatic and programmable. No carpal tunnel!
• You can pick one up at a brick-and-mortar shop.

Cons of Purchasing a Fleshlight or Pocket Pussy

• Some Fleshlights can be a bit pricey.
• They are not discreet at all.
• Purchases from the official Fleshlight.com store are maybe not as discreet as you would like, as it shows up on your bank statement unless you use a prepaid card.
• Unless you shop in-person, you have to wait for it to be shipped.

Conclusion

Making a DIY stroker is pretty easy to do, not to mention being inexpensive or even free! Plus, many of the do-it-yourself pocket pussies and Fleshlights above are discreet, easy to hide and you can use them over and over again. But the best part is that you can choose a texture you like or try several; after all, you are the one creating it! So, gather your supplies and start creating!

If you use any of the Bedbible DIYs above, be sure and comment below and let us know how it went. Got some tweaks or ideas of your own? You can share those too. While you are sharing, don’t forget to follow us on Twitter and Facebook, check out our Instagram page and follow our YouTube channel for lots of product reviews and fun videos and podcasts.